Carbonit Sanuno Comfort Countertop Water Filter with IFP Puro
The Carbonit Sanuno Comfort countertop water filter is delivered ready for connection with a Carbonit IFP Puro filter cartridge. The filter impresses with its very high flow rate combined with strong filtration performance against contaminants. The Carbonit Sanuno is very easy to install. This is done by connecting the filter device to the aerator of the existing faucet using a hose. The filter cartridge is easy to insert or replace by unscrewing the filter housing.
As an IFP Puro, it combines the special properties of a sintered Carbonit monoblock with microfiltration of 0.15 µm through the internal capillary membrane (Ster-O-Tap). IFP Puro filter cartridges are ideal for low water pressure and help reduce bacterial loads. The filter cartridge must be replaced after 6 months. A maximum of 5,000 liters of water may be filtered during this time.
Carbonit IFP Puro Filter Data

Filter element activated carbon block approx. 5.0 micrometers
Filter fineness capillary membrane 0.15 micrometers microfiltration
Water flow rate 8 liters per minute*
Operating pressure max. 6 bar
Operating temperature 10° to 40° C
Capacity maximum 5,000 liters
* approximate water flow of a new filter cartridge at 4 bar line pressure.
Application note SanUno:
Do not operate behind non-pressurized boilers. Do not connect to a shower fitting. Use with cold water only. Protect from frost. Particularly suitable for low water pressure.
Scope of delivery: Complete Carbonit filter unit with connection hose and special diverter valve with adapter for internal threads. One Carbonit Monoblock IFP Puro filter cartridge (service life: 6 months or 5,000 liters – filter fineness < 0.15 µm – flow rate: 6 liters per minute) is included.
More information about the
ifp puro carbonit
Overview of drinking water filter devices: Carbonit water filters