.gif)
Water Swirler for Shower and Bath
made of stainless steel with 1/22 threads
Shower and bath water swirlers use micro-levitation technology. This creates extreme flow speeds between different liquid layers inside the swirler. Depending on the quality of your tap water, you may notice a difference, and with medium-hard or hard water, you will also see an improvement when cleaning the shower or bath.
Alvito water swirlers are durable and robust
The physical principle works consistently and permanently without maintenance d without electricity or other external energy sources.
Inside the water swirler, the internal water structure is loosened and de-densified through whirls and counter-whirls. At the interfaces of the micro-whirls, the water clusters become smaller while the internal surface area of the water increases. This enhances its dissolving capacity and natural vitality.
What a stream achieves over long distances and extended time, water swirlers accomplish in compact form within a short period using micro-levitation. This is made possible by high-speed swirling through natural flow patterns and precise engineering.
The water swirler for shower and bath is installed at the outlet of a shower or bath fitting. It has a 1/22 internal thread on the input side and a 1/22 external thread on the output side. Screw it onto the shower hose connection hand-tight. Ensure correct placement of the sealing rings and the correct flow direction (arrow on the swirler).
Water swirlers must not be installed behind a low-pressure boiler (non-pressurized boiler or small storage tank), a low-pressure instantaneous water heater, or on shower fittings or installations that cannot withstand normal water pressure.
Material: Stainless steel. Dimensions approx.: Length 50 mm, f 23 mm